YoungBoard Conductive XLPE is a good-quality foam with a firm feel. The most common application is packaging of electronic components.
|Density (LB/Cubic Ft.)||ASTM D 3575||3|
|Tensile Strength (LB/In. Sq.)||ASTM D 3575||49.7|
|Elongation (%)||ASTM D 3575||75|
|Tear Strength (LB/In.)||ASTM D 3575||7.3|
(LB/In. Sq.): 25% / 50%
|ASTM D 3575||13.2 / 27.5|
|Compression Set (%) Original Thickness||ASTM D 3575||4.5|
|Surface Resistivity (OHM)||ASTM D 3575||1x105 ~ 1x109|
24 Hour Test @ 176° F (70°C) AVE MD(%)
|ASTM D 3575||≤ -1.3|
|ASTM D 3575||0.30|
|Fire Retardant Additives||ASTM D 3575||No|
All values reported are typical values. We cannot guarantee the applicability or the accuracy of this information or the suitability of the product for any particular purpose. This product is sold without warranty, expressed or implied. (Unless stated otherwise.) Buyer assumes all responsibility for loss or damage arising from the handling and use of this product, whether done in accordance with directions or not. Statements concerning the possible use of this product are not intended as recommendation to use this product in the infringement of any patent.
Copyright © 1997-2020 The Foam Factory. All rights reserved.